lights

[barend]

Lost one of the lenses on my rear lightbar, can these still be found new? or has anyone replaced the whole unit (with a LED one)?

 

Also need a solution for the airdam lights, one has crumbled on the inside so I either need a nother one or find a replacement solution in which case i'll have one to "give" away.

[bendtdj]

I, too have been looking to either replace the broken on or both. I saw this on JC Whitney this morning.

 

http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2003430/c-10111/Nty-1/p-2003430/Ntx-mode+matchall/N-111+600014762/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=lights

 

http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/G_13430G_SW_1.gif

 

I don't know if it will work or not, the description reads 2-1/4" x 3-3/4" x 1/2"D and I measured the hole in the "scoop" as being 2 1/4" X 2 3/4". Depends on if the back side is angled i guess.

 

Going to keep looking though.

 

Dave

[barend]

Had one of hese waiting for the sidecar and tried it on the bike, looks like it would fit and look good. and only $8 bucks a pop!! I'll have to find something else for the trunk guard and the bigger ones on the back of the bumper.

 

http://www.superbrightleds.com/specs/moc.htm

 

I'll post a pic when I've got them mounted.

[Snaggletooth]

Check around under "Drag Specialties". They are Barons Minis. I found some on Ebay awhile back for mine. I'd like tp find some of the cork gaskets for mine.

[BOO]

Check around under "Drag Specialties". They are Barons Minis. I found some on Ebay awhile back for mine. I'd like tp find some of the cork gaskets for mine.

 

Yeah, I'm pretty sure they are Drag Specialties lights. I replaced some in a rear mud flap I had on a first Gen and they were Dray Specialties lens.

BOO

[barend]

I tried going there earlier today but I get a message saying its a "bad gateway"

[mbrood]

Running light replacement lenses: Drag Specialties

DS-28015 large red

DS-280153 large amber

DS-280168 small red

DS-280167 small amber

[Schlepporello]

Those original lights at best are wishful thinking. You want to be seen night and day, not just when it's pitch black enough for those puny factory lights to finally show up. I've replaced all of the factory square thingies on my bumper with LED's thanks to my good friends at the trucker's chrome and light shops. Check this thread.

[ame=http://www.venturerider.org/forum/showthread.php?t=26761]LED's, my feeble attempts. - VentureRider.Org[/ame]

Edited September 10, 2009 by Schlepporello