Cheap Adjustable Work Table

[KeithR]

I was about to put this old ironing board in the trash when the light came on ! Works perfect for an adjustable height work table. easy to move around and store. Oh ya I did replace the one in the house....

 

Keith

[Squidley]

Pretty slick idea, now put some rollers on it and you can roll it around the garage as your working on the bike

[6m459]

Good use for the old ironing board!

 

Along the same lines, but slightly different purpose, I built one of these as my garage work bench.

 

http://www.hammerzone.com/archives/workshop/bench/wswba40.jpg

 

I have to say, its is as sturdy as he11 ! I built it so that the lower frame is just a bit lower than a pair of 4 wheel dolly's I have so that I can use my shop jack to lift the bench an inch or so, one end at a time, and slip the two dolly's under side by side. Then I can roll the thing around the garage if I need to.

 

I have done this while several hundred pounds of floor tiles have been on the lower shelf. No problems.

 

Hope this is of interest.

 

Cheers,

 

Brian H.