what screws

[Silver Bullet]

what screws do we turn out a 1\4 turn on our carbs. and what dose it do for the bikes?

I guess I'm dumber than a mud puddle.:confused24:

[V7Goose]

I don't know who told you to just start turning screws on your carbs, but I wouldn't suggest that at all.

Goose

[Pecker]

It sounds like you are referring to the idle circuit mixture screws. If that is the case, that screw will either richen or lean out your idle circuit depending on which direction the screw is turned. That being said, I wouldn't suggest just randomly turning these screws without some diagnostics first. Many a carb has been screwed up by people trying to tune them without some decent knowledge of their inner workings. My suggestion would be hooking up with a member that owns a color tune kit AND knows how to use it. I am sure others here will chime in and color in the rest of the picture.

[eusa1]

THE SCREWS ON YOUR TOUR PACK MOUNTS!!

 

THAT IS IF THEY ARE A 1/4 TURN LOOSE............:Laugh:

[Cougar]

might be asking about this screw under the cap

above the curve of my allen wrench..

http://www.venturerider.org/rsvcarbremoval/image116.jpg

[Cougar]

Ohhh eusa1, what are we going to

do with you, sheesh... besides taking

you out to lunch!

[eusa1]

lets just have the lunch, and then we will talk about it?? hmmmm???