dmoff1698 Posted June 1, 2009 #1 Posted June 1, 2009 This weekend I decided to change the fluids in my 99 RSV, including a good radiator flush. One thing leads to another and decided after 10 years and 120K miles, I might as well change the thermostat while I was at it, even though I haven't been having problems. First let me say this is not a job for those short on patience. To get the housing out of the bike it must be disassembled a piece at a time while still in the frame. Finally got the housing out THEN called my local stealer. Just the way I do things. Holy $#%@..., stealer said he could have the new thermostat in two weeks, that is if I would bring him the paultry sum of $57.40. "For a @#$% thermostat? are you sure you"re not looking at the housing?" "No sir, the housing is pretty expensive.":starz: Now I don't see anything special about this thermostat so off to the auto supply I go. "Hey buddy, you got one of these?" "Yep, sure do." Sure enough, it is a Murray, Part Number 3168. Cross reference says that it goes into a 2000 Kia, Mazda, and Mercury. Best of all, $7.60 later and I'm out the door. One other thing, when doing this on a bike with this many miles. The water pipes (3 ea) that go to the thermostat housing have an "O" ring seal. Mine looked good but refused to seal when I got it all back together. Take the rubber "O" rings with you and get replacements while getting your thermostat. Otherwise you can pull that housing twice like I did. Aw hell, they're $.30 each, go ahead and get them anyway, no mater how many miles you got! Anyway, I figure if I had all the parts up front and only had to do it once, this would have been about a 3-4 hour job. Took me a full day.
1BigDog Posted June 1, 2009 #2 Posted June 1, 2009 I did almost the same thing to my 99 over the winter. Took the thermostat housing out, replaced the thermostat and the thermal switch and 2 of the 3 o-rings, mainly because the rear bolt on the back pipe wouldnt budge and since the other o-rings looked good I just left the rear one alone. Guess which one leaked?? Yep, the rear one. Took it all apart and finessed that stuck bolt out and found that o-ring was cracked pretty bad. I already had the parts on hand. Got my parts online and the thermostat was 30 something dollars. Glad you was able to find the right part elsewhere. Not a job for the faint of heart......
N3FOL Posted June 1, 2009 #3 Posted June 1, 2009 Goood job on the nice find on a replacement thermostat. As long as the quality is similar to the OEM thermostat, I also don't have any problems getting it from a NAPA store or Advance Auto. For a '99, glad to hear that you decided to replace the thermostat.
tommycole Posted June 1, 2009 #4 Posted June 1, 2009 What temp do the thermoststs open? Do you recomend leaving it stock? Thanks TC
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now