Harley FLT 1584 pipes

[YamaDuck]

Does anyone know what type of pipes these are? Here is the number stamped on them

HAR FLT 1584/1688.

 

:think::think:

Edited May 6, 2009 by YamaDuck

[raceman62race]

I think that is going to be a set of pipes off of a Harley Electra Glide

[boominup]

Does anyone know what type of pipes these are? Here is the number stamped on them

HAR FLT 1584/1688.

 

:think::think:

Are they slash cut or straight like our OEMs? They may be from a Road King, but they all interchange. Brian

[YamaDuck]

They look very similar to stock RSV pipes.

[big mike]

Does anyone know what type of pipes these are? Here is the number stamped on them

HAR FLT 1584/1688.

 

:think::think:

 

 

 

I Googled your part number and came up with an FLHTCUI which is an ultra classic harley. Those pipes should slip on and work just fine for you. The 1584/1688 signify engine ci's....96ci for the 1584cc not sure about the 1688cc but these pipes will fit either and also our bikes. Good luck.

 

P.S. I found this site helpful as far as the exhaust goes, some pictures, sound clips, and alot of info. Just scroll to the bottom and click on free tech info.

 

http://www.venturers.org/Tech_Library/?action=category&cat_id=002

 

 

Big Mike

[YamaDuck]

Thanks I'll check it out. The left pipe looks like it has a plug or something in it where the right side is open. Thats what concerns me.

Thanks again

[Tombo]

The newer Harley pipes have a catalytic converter in one side, probably the one that looks plugged.

[MidlifeVenture]

Watch tat the one muffler isn't a dummy muffler usually the left one if the bike it came off of had a 2 into 1 exhaust they hang a empty muffler for looks.

[Renne]

I just completed my conversion last night with the FLT's, I made my own brackets, (I have a metal shop) They sound just fine! A nice tone at hwy speed and a distinct "CRACK" when you "throttle on". Not annoying at all and a far cry from the OEM's!

 

"Kick stand up, Rubber down"

 

Renne

[sofapilot]

I Googled your part number and came up with an FLHTCUI which is an ultra classic harley. Those pipes should slip on and work just fine for you. The 1584/1688 signify engine ci's....96ci for the 1584cc not sure about the 1688cc but these pipes will fit either and also our bikes. Good luck.

 

P.S. I found this site helpful as far as the exhaust goes, some pictures, sound clips, and alot of info. Just scroll to the bottom and click on free tech info.

 

http://www.venturers.org/Tech_Library/?action=category&cat_id=002

 

 

Big Mike

 

1688 is the 103" Engine.. that is a Stock Police engine or a stage II modified 96" engine they share the exhaust

[YamaDuck]

Thanks for the information and link. I'll check into it.