Need Right Panel on faring that holds CB

[mmacpuguy]

Mine is cracked and chipped - anyone have one to sell?

 

Thanks and what a great site!

 

~Norm

[MiCarl]

I recently replaced mine. They are still available if you're willing to part with the $$.

[Indyventure]

need to replace mine too. so far the cheapest on-line I have found is here http://www.babbittsonline.com/pages/parts/viewbybrand/2/Yamaha.aspx

 

it is listed under cowling

 

SKU: 26H-2837M-01-00 PANEL, console 2

1

$53.64

 

 

 

Bob

[Indyventure]

I also need to repalce the louvered vent on my right side cover..now they are salty! about $130 !

[Monty]

need to replace mine too. so far the cheapest on-line I have found is here http://www.babbittsonline.com/pages/parts/viewbybrand/2/Yamaha.aspx

 

it is listed under cowling

 

SKU: 26H-2837M-01-00 PANEL, console 2

1

$53.64

 

 

 

Bob

 

I found it to be under fairing.

[Indyventure]

oops...you are right...mental fart.

[timgray]

need to replace mine too. so far the cheapest on-line I have found is here http://www.babbittsonline.com/pages/parts/viewbybrand/2/Yamaha.aspx

 

it is listed under cowling

 

SKU: 26H-2837M-01-00 PANEL, console 2

1

$53.64

 

 

 

Bob

 

 

Be wary of Babbits. They are local to me and they will say something is in stock until you pay for it. Then suddenly it's backordered for 6-8 weeks.

[MiCarl]

cheapcycleparts.com has it for $45.23.

 

I rarely find parts cheaper elsewhere.

 

Tricky part with them is their new website doesn't have fiches for older bikes. You need to look up your part numbers on the Yamaha web site then enter them in the quick order form.

 

Now for the bad news - If you're looking for the piece that carries the CB and CLASS in a MKII you need part number 59J-28221-00-00 PANEL, TERMINAL2 $120.47

[Indyventure]

MiCarl,

 

you are correct that is the right piece for waht I'm looking for. I was picking out the wrong one. ugh.. $$$$!!

but it was under the cowling 1 fiche on babbits. thanks for the info. WOW this plastic is expensive on these older bikes. may have to live with the glued cracks for a bit longer.

 

bob

[timgray]

I have found that if you fix the plastic right, so the cracks are firmly repaired, you can lightly sand it, clean it all down with painters prep and then repaint with, "black bumper and trim paint"

 

It looks great and is a very close match to what it's supposed to look like without the sunfading.

 

I'm hoping to find a only lightly cracked left radio top plate so I can fix mine that is in 30 pieces.

[mother]

last night i did a bunch of repairs to my right side Cb/compressor plastic panel with a product called Plastex. awesome stuff. just ordered some online last friday and it was at my door on tuesday.

 

Tim, thanks for the tip on painting with black bumper and trim spray, i have a can out in the garage that i am going to try now that the panel is back in one piece.

 

cheers, Scott

[Indyventure]

is the pastex an adhesive or is it formable for a filler? mine is in decent shape except for the left long edge, what I will call the return flange, that comes back to meet the dash face. That return flange is missing a few pieces and I'd like to be able to fill it in with a litle something something to blend it.

 

Bob

[mother]

with Plastex you can attach broken off pieces, you can build up broken off sections, you can make your own mould and create your own pieces. check out their web site and watch the video, and have a look at some of the repairs that this stuff can be used for.

 

 

i have tried fiberglass repair

5 minute epoxy

plastic repair stuff from hardware stores

and they all have peeled off over time

[skydoc_17]

Here is a link to the site, good stuff!

 

http://plastex.home.att.net/

 

Earl

[Indyventure]

plastex...that stuff looks cool !

[Dragonslayer]

Mine is cracked and chipped - anyone have one to sell?

 

Thanks and what a great site!

 

~Norm

Good luck they are rare I had to make mine. When theyb come up on e-bay they are not cheap.