SilvrT Posted April 15, 2009 Share #1 Posted April 15, 2009 Here's an inexpensive "Carbon Fibre" treatment I used to dress up my electrics side covers. Total cost about $35 and 1 hr of time. Purchase roll of TrimBrite "Carbon Fibre" film and a roll of 1/8 inch "Custom Chrome" accent striping. I got mine at Canadian Tire. You'll need a small spray can of some color...I chose silver (because the bike is black) ... the Carbon Fibre film shows the underlying color and with black, nobody would see it. Mask off the area you want for the Carbon Fibre. Scuff it up a bit with a scuff pad and clean it good with some paint thinner (or other de-waxer, de-greaser) Apply the under color....let it dry good...remove the masking tape. Take a strip of the Carbon Fibre and remove the backing paper. Lay it down slowly and evenly... make sure you don't get any bubbles. If you do, just poke them with a razor knife and work the air out. Trim off the excess with the razor knife. Apply the chrome trim to the edges. Link to comment Share on other sites More sharing options...
friesman Posted April 15, 2009 Share #2 Posted April 15, 2009 That looks great Rick. i like the look of that. Brian Link to comment Share on other sites More sharing options...
skydoc_17 Posted April 15, 2009 Share #3 Posted April 15, 2009 Hey Rick, WOW! I really like the way you customized your side covers. I would venture to say that NOBODY has a set of side covers like yours. Excellent use of materials and the old knoggen! Any one can go out and buy a piece of chrome:mo money: but to put some effort into a mod like this really impresses me! Earl Link to comment Share on other sites More sharing options...
whanna Posted April 15, 2009 Share #4 Posted April 15, 2009 That IS purty! Good eye, nicely executed. I really like that. Link to comment Share on other sites More sharing options...
kenw Posted April 15, 2009 Share #5 Posted April 15, 2009 Looks great! Link to comment Share on other sites More sharing options...
slick97spirit Posted April 15, 2009 Share #6 Posted April 15, 2009 :big-grin-emoticon:wow, that looks hot against the black. way cool Link to comment Share on other sites More sharing options...
SteveW Posted April 15, 2009 Share #7 Posted April 15, 2009 Real nice job it looks great with the Black on the Bike. Link to comment Share on other sites More sharing options...
SilvrT Posted April 15, 2009 Author Share #8 Posted April 15, 2009 I would venture to say that NOBODY has a set of side covers like yours. Heh .... I would "venture" to say .... I won't be the only one for long! ... considering the comments. That's good ... sharing ideas is what it's all about. Now that the side covers are done, I'm working on something for the air filter covers and who knows what next after that LOL. Link to comment Share on other sites More sharing options...
SaltyDawg Posted April 15, 2009 Share #9 Posted April 15, 2009 Real nice. Looks pretty good. Link to comment Share on other sites More sharing options...
skydoc_17 Posted April 15, 2009 Share #10 Posted April 15, 2009 Hey Rick, Wasn't sure if you would pick up on that, what am I saying, you thought up those "spiffy" side covers, I should have known! Great Job, Earl Link to comment Share on other sites More sharing options...
SilvrT Posted April 16, 2009 Author Share #11 Posted April 16, 2009 It just "hit" me .... haven't had her out on the road yet.... kinda now wondering what effect the engine heat will have.... I guess only time will tell. I'll add a post if it scews it up or not. Link to comment Share on other sites More sharing options...
RossKean Posted April 16, 2009 Share #12 Posted April 16, 2009 Heh .... I would "venture" to say .... I won't be the only one for long! ... considering the comments. That's good ... sharing ideas is what it's all about. Now that the side covers are done, I'm working on something for the air filter covers and who knows what next after that LOL. I would LOVE to see something like that for the air filter covers. Cool alternative to the VERY expensive Yamaha chrome covers. Keep us posted! Ross Link to comment Share on other sites More sharing options...
Redneck Posted April 16, 2009 Share #13 Posted April 16, 2009 That silver paint looks just like gold. Great idea and good job it looks great. Link to comment Share on other sites More sharing options...
Bubber Posted April 16, 2009 Share #14 Posted April 16, 2009 Here's an inexpensive "Carbon Fibre" treatment I used to dress up my electrics side covers. Total cost about $35 and 1 hr of time. Purchase roll of TrimBrite "Carbon Fibre" film and a roll of 1/8 inch "Custom Chrome" accent striping. I got mine at Canadian Tire. You'll need a small spray can of some color...I chose silver (because the bike is black) ... the Carbon Fibre film shows the underlying color and with black, nobody would see it. Mask off the area you want for the Carbon Fibre. Scuff it up a bit with a scuff pad and clean it good with some paint thinner (or other de-waxer, de-greaser) Apply the under color....let it dry good...remove the masking tape. Take a strip of the Carbon Fibre and remove the backing paper. Lay it down slowly and evenly... make sure you don't get any bubbles. If you do, just poke them with a razor knife and work the air out. Trim off the excess with the razor knife. Apply the chrome trim to the edges. Just to add to your knowledge of adding the carbon fiber. When I was in the body shop business and we were putting the wood grain decal on the station wagons, we used soapy water (dish washing soap is fine) and laid the decal down and used a rubber squeegee to remove the water from under the decal. It eliminates the bubbles and then if there still are some, prick them with a sharp needle to remove the air and squeegee over them again. Try to move in one direction because at least with the decal they tend to stretch a little. I hope this helps on the next piece you do. BTW Great job on the side cover it looks pretty cool!!!! I wonder what different base colors would do. (gold, red, black, copper) Steve aka Bubber Link to comment Share on other sites More sharing options...
SilvrT Posted April 16, 2009 Author Share #15 Posted April 16, 2009 Just to add to your knowledge of adding the carbon fiber. When I was in the body shop business and we were putting the wood grain decal on the station wagons, we used soapy water (dish washing soap is fine) and laid the decal down and used a rubber squeegee to remove the water from under the decal. It eliminates the bubbles and then if there still are some, prick them with a sharp needle to remove the air and squeegee over them again. Try to move in one direction because at least with the decal they tend to stretch a little. I hope this helps on the next piece you do. BTW Great job on the side cover it looks pretty cool!!!! I wonder what different base colors would do. (gold, red, black, copper) Steve aka Bubber Thanks for the tip re: the soapy water... I thought about doing it that way because I've done a lot of that with larger decals in the past but it was such a small piece, I didn't bother. Also, since it's mostly flat, taking a bit of time and smoothing the film down as I go ... I think I had one or two very small bubbles. I've also done quite a bit of window tinting with the "film" ... using soapy water, squeegie, etc. Glad you posted this tho... good info for others not so much "in the know". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now