JimRoberts Posted March 17, 2009 #1 Posted March 17, 2009 Anyone got a CB for a 1st gen. they would part with? Squelch pot on mine is shot so I can either listen to CB or radio but not both at the same time.
Skid Posted March 17, 2009 #2 Posted March 17, 2009 I thought the squelch on mine was bad, but turned out to be the knob. After I replaced the knob and it works great. It has a pretty good seal to keep out the dust and mine was very clean down deep inside. May try checking the knob first. Hope this helps
Gearhead Posted March 17, 2009 #3 Posted March 17, 2009 The pots in these radios, believe it or not, are a standard type. I found some similar at a local CB shop at a truck stop and was able to wire it in. Jeremy
JimRoberts Posted March 18, 2009 Author #4 Posted March 18, 2009 While I had the CB out looking for a loose wire or something I could fix, I opened up the bottom and back of the radio and could see the shaft turning without having any effect. Several people mentioned the knob may be turning without turning the shaft, that is not the case.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now