Ignition Tester

[Freebird]

Because I have seen several reports here lately about coil failures, I went searching for an easy way to test the ignition coils on our bikes. I found and ordered a Motion Pro ignition tester and it came in this week. According to our service manual for the RSV, the minimum spark gap for a good ignition spark is 8mm (.031). Now you could pull a plug, use a known good plug and test the spark but that really doesn't give a good indication of the strength of the coils. This device allows you to check the strength of the coils without pulling the plugs and the gap is adjustable so you can increase it to see how strong that spark is. You can also easily see the color of the spark. I tested it early this morning and found that it is easy to use and works very well. Just thought I would pass it on. It is inexpensive and I think it will be a great diagnostic tool.

 

http://www.motionpro.com/motorcycle/tools/ignition_system_tester

[Eck]

just placed my order...thanks!

If it aint chrome, its tools.......

Always spending the $$$$ on this site for something

[KiteSquid]

Can you post the user's manual??????

[Freebird]

I'll see if my old scanner still works. Haven't used it in a long time. It's just one page and really nothing to it. You just plug the coil wire onto the tester, ground the tester, crank over the bike.

[Rocket]

just placed my order...thanks!

 

If it aint chrome, its tools.......

Always spending the $$$$ on this site for something

 

That is normal for this place.........

[Freebird]

Hey...at least this one was CHEAP. How often do you find a tool or accessory for a motorcycle for under $20.00 including shipping?

[KeithR]

Just a note to the Canadian Members.

 

Its available from Motovan....Part #08-122 @ $12.99

 

 

http://www.motovan.com

 

page 1112 of the main motovan catalog (1st catalog on screen)

 

I must get the local dealer to order me one.

 

Keith