Jump to content

Recommended Posts

Guest wildcelt
Posted

Went to start my bike this morning, turned the key, hit the start button and nothing! Neutal light is on, and the headlight dimmed as I hit the start button. Does anybody have any ideas before I shell out $300 for a new starter motor?

 

Thanks

Posted

Is your kill switch off?

Run a big wire, like a battery cable from the positive on the battery to the post on the starter(make sure it is in neutral). This by-passes the solenoid.

Let us know if this worked.

RandyA

Posted

Do not spent anything like that. By sure if the relay bypass doesn't work, they will be the contacts on the rotor of the starter.

 

There are some kits on e-bay for around 20$ that will help you to redo your starter. Any way, you will need to check the rotor on some places as Autozone, or any place that repairs starters for cars. It is easy.

 

:080402gudl_prv:

 

Of course, 280$ tip are accepted via Paypal....

:whistling:

Posted

Hi,

 

i the Bypass works out, clean the Contacts in the Handlebar-Switch.

 

There is an Opener for shut down the Headlight while pressing the Start-Button and a Closer-Contact to the Starter-Solenoid.

Posted

Check water level in Battery:

 

Charge the Battery:

 

If still don't start, check the battery cable ends, clean and retorque.

 

Especially check where the battery cable connects to the Starter Motor.

 

You might have a bad Starter Solinoid.

 

As a rule of thumb, the Starters themselves do not fail on these bikes.

 

Check everything else first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...