hipshot Posted March 8, 2009 #1 Posted March 8, 2009 i have taken my seat cover off the '86, and did some major "whittling". now the recover question::what do you use to reattach the seat cover to the plastic pan? i seriously doubt that i could find 1/8 inch staples , this side of Japan, so i am open for suggestions. just jt
pegscraper Posted March 8, 2009 #2 Posted March 8, 2009 Eighth inch staples? I used whatever staples were in my Arrow staple gun. Probably 1/2" wide by 3/8" deep.
gunboat Posted March 8, 2009 #3 Posted March 8, 2009 jt i agree with peg just use any staples you have. may just have to use a few more of them. don c.
hipshot Posted March 8, 2009 Author #4 Posted March 8, 2009 Lynn, how do you keep the staples from penetrating through the pan? looks like the ends of the staples could cause leg injury, if they protrude . just jt
pegscraper Posted March 8, 2009 #5 Posted March 8, 2009 They probably do a little bit. I didn't even think about it. But the foam is thick enough I don't see the staples poking through it to the outside. Just find the shortest staples you can.
mbrood Posted March 9, 2009 #6 Posted March 9, 2009 Corbin used pop rivets and flat washers on mine...
hipshot Posted March 9, 2009 Author #7 Posted March 9, 2009 i'm gonna take ya'll's advice. remember , though, if i get wounded,pegscraper is at fault! lol just jt
mtman Posted March 9, 2009 #8 Posted March 9, 2009 If ya can, use stainless steel staples. Got mine at Home Depot. Regular ones will rust. Used them on my boat seat covers.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now