Squidley Posted January 28, 2009 #1 Posted January 28, 2009 Hey all you 1st genners... I wanted to post up that I have only 6...let me repeat this 6 sets of driving light brackets left for sale. I will not be making these again and once they are gone...there gone. So if your on the fence about buying a set, dont sit too long as I will be putting them up on ebay tonight for auction.
Squidley Posted January 29, 2009 Author #2 Posted January 29, 2009 Right back up top...had 1 member interested and I will be putting the rest up on ebay by weeks end
Squidley Posted February 11, 2009 Author #3 Posted February 11, 2009 Ok back up top, I have 3 sets left, sent another one out today...remember last of the bunch!
Squidley Posted February 22, 2009 Author #4 Posted February 22, 2009 Ok folks.... I have sold all the Driving light brackets, there is 1 set left that will go to the international rally to be given away. I want to thank all of you folks that have purchased these from me in the past
Squidley Posted May 30, 2009 Author #6 Posted May 30, 2009 Do you have any brackets left. Thanks I do not have any brackets left
Zfrebird4 Posted October 18, 2009 #7 Posted October 18, 2009 They are great on your former 86 Squidley, but the vibrate. I have two thought; helps folks see me coming better; second, probably could see better if the vibration was gone. Do I need to tighten them MORE, or do you have other suggestions. Big hi to Lonna; her back seat (and the whole seat) has been rebuilt, ... but is STILL virgin. Looking for a female rider in CO, ... single, too. Send me THAT part if you can! LOL. I have 73M on her now and still going. Can I add something for the slight leaks ont he valve covers, etc? Thanks. Your friend Jack Jack Tharp Fort Collins, CO aka DePreach: weddings preferrably bikers, outdoors; funerals as needed; and NOT A FUNDI; just well centered in the faith! JZ
saddlebum Posted October 18, 2009 #8 Posted October 18, 2009 Best is just to get a new gasket and gromets for the bolts. Its not that hard to do and once your done, your done.
Squidley Posted October 18, 2009 Author #9 Posted October 18, 2009 Do I need to tighten them MORE, or do you have other suggestions. I have 73M on her now and still going. Can I add something for the slight leaks on the valve covers, etc? Jack, This can be an issue with some of them, the only fix I have found is to remove the brackets from the angle bracket they sit on. You have to make a gusset for that small bracket and weld it on, bolt it all back togetrher. As far as the valve cover gaskets, I thought you had your mechanic in Ft. Collins put a set on? If not the only way to keep them from leaking is replace them....thats a job. Have you swithched over to synthetic oil? if so that is most likely your culprit as older gaskets will tend to start to leak once synthetic is installed.
RedRocket Posted October 20, 2009 #10 Posted October 20, 2009 I bought a set from Squidley but never used them. I paid $ 30 shipped, and I'll pass them along for the same. PM me if interested.
RedRocket Posted October 23, 2009 #11 Posted October 23, 2009 pictures always help. http://greenagain.smugmug.com/Other/ebay-5-318/Ebay102109-101/689788053_BpQtH-L.jpg http://greenagain.smugmug.com/Other/ebay-5-318/Ebay102109-099/689787993_R3FvM-L.jpg
Dragonslayer Posted October 23, 2009 #12 Posted October 23, 2009 The set I won at Vogel work great.i like em. Thanks Squid.
Zfrebird4 Posted October 26, 2009 #13 Posted October 26, 2009 I think of doing what you said for the lights, but actually I think I'll leave them as they are, ... for added safety; they still help light the road very well. Thanks for installing them before selling them to me. Nope, would not use the artificial oil in an engine already on the real thing. Thanks for responding, and may you both be well! JackZ
Guest rande Posted October 26, 2009 #14 Posted October 26, 2009 Anyone got a set of the 1st Gen driving light brackets they would part with?
Black Owl Posted October 26, 2009 #15 Posted October 26, 2009 Anyone got a set of the 1st Gen driving light brackets they would part with? Yes. Send me your address and they are yours
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now