ibents Posted January 12, 2009 #1 Posted January 12, 2009 Check this Video out!! Ian [ame=http://www.youtube.com/watch?v=yJPTSaARlvs]YouTube - Hubless Chopper, (The Hubless Monster) A Wicked Bike Without Rims that Rides!![/ame]
a1bummer Posted January 12, 2009 #2 Posted January 12, 2009 They've raised a few questions for me. How does the speedometer work? How is the rear driven? Are they as stable as hubbed wheels? How does the front effect the steering?
Guest tx2sturgis Posted January 12, 2009 #3 Posted January 12, 2009 Saw one of those at Sturgis several years ago. This little skinny guy crawled right thru the opening....just havin fun I guess.
86er Posted January 12, 2009 #4 Posted January 12, 2009 Billy Lane did one or two "hubless" rear wheels. It's actually more like a big open hub. The drive chain goes around the outside of it.
catang5oh Posted January 13, 2009 #5 Posted January 13, 2009 Billy Lane did one or two "hubless" rear wheels. It's actually more like a big open hub. The drive chain goes around the outside of it. Yes that is one of Billys bikes, that one debuted at the Iron Horse in Daytona somewhere around 2005. Leave it to an Aerospace Engineer to come up with something outlandish like that. Too bad hes serving time !!
MikeM8560 Posted January 13, 2009 #6 Posted January 13, 2009 . Too bad hes serving time !! had it comming riding DWI:no-no-no:
cowpuc Posted January 13, 2009 #7 Posted January 13, 2009 Saw one of those at Sturgis several years ago. This little skinny guy crawled right thru the opening....just havin fun I guess. I actually did that TX!! The "rim" on these hubless wheels are acutally a bearing race and the interier of the rim where your spokes would normally attach is the ID of the bearing,,, pretty cool really!! The only functional downfall that I could see (and I checked it out very closely at Sturgis) was that the way the secondary drive sprocket/sheeve has to protrude from the side in order to work - it has to be the same size as the hub(bearing race) - this makes it VERY close to the surface you are riding on.. I showed that to another builder who was there and he says "so?".. I then said,, ok,, picture this,, your riding along and your in a corner - a rock is in the road and it manages to get between the secondary and the pavement - again he says "so".. Then I said, did you ever try to ride a bicycle on the sidewalk without tires when you were a kid???..... He says,, oh yea - that wouldnt be nice would it... 'Puc
AmnChode Posted January 13, 2009 #8 Posted January 13, 2009 Here is the guys who did it: Amen Motorcycles It uses a friction drive....
timgray Posted January 13, 2009 #9 Posted January 13, 2009 speedo can come off the transmission final drive. These can be gear driven, chain or even belt. There was a showcar in detroit that had all 4 wheels "hubless" like that, but it was an electric car.
MAINEAC Posted January 13, 2009 #10 Posted January 13, 2009 Yes that is one of Billys bikes, that one debuted at the Iron Horse in Daytona somewhere around 2005. Leave it to an Aerospace Engineer to come up with something outlandish like that. Too bad hes serving time !! I don't think he's served any time yet... Last I heard they just threw a new set of charges at him... http://www.floridatoday.com/graphics/mastlogo.gif January 6, 2009 Bike builder faces additional felony charge BY KEYONNA SUMMERS FLORIDA TODAY Prosecutors have filed an additional felony charge against famed motorcycle builder Billy Lane, court records show. Lane, 38, was charged two years ago with one count of DUI manslaughter in connection with a Labor Day 2006 traffic accident in which 56-year-old Sebastian Inlet park ranger Gerald Morelock died. Police said Lane’s blood-alcohol level was more than twice the legal limit when he crossed a double yellow line to pass several cars near Melbourne Beach, striking Morelock’s motorcycle head-on. DUI manslaughter is a second-degree felony, punishable by up to 15 years in prison. However, the Brevard state attorney’s office has filed an alternative charge of vehicular homicide, also a second-degree felony punishable by up to 15 years in prison. Prosecutor Tom Brown said he filed the charge in response to a November hearing, during which Lane’s attorneys withdrew their bid to bar trial testimony about the blood evidence and said they would instead raise the issue at trial. DUI manslaughter requires proof that the defendant caused or contributed to the crash and had an unlawful blood-alcohol level, while vehicular homicide simply requires proof of reckless driving. Once the defendant waives their right to speedy trial, there is a three-year statute of limitations on filing charges against him or her, Brown said. “This issue (about the admissibility of the blood evidence) will not be resolved until trial so we have gone forth with the added charge,” Brown said. Brown said filing the vehicular homicide charge, which requires the state to prove Lane was driving recklessly but does not include a drug or alcohol element, ensures prosecutors are able to proceed at trial, no matter the judge’s ruling on the blood evidence. “We are preparing for all eventualities at trial,” he said. Lane’s defense attorney, Greg Eisenmenger, said he doesn’t believe there’s any basis for either charge filed against his client. “It came as somewhat of a surprise to see something like this filed so late in the game,” he said. “This is a tragic accident that doesn’t rise to the level of willful and wanton reckless driving,” Eisenmenger said of the new charge. “And there’s significant issues whether Mr. Lane was under the influence of anything at the time of the accident.” Lane’s trial is set for Feb. 9.
CrazyHorse Posted January 14, 2009 #11 Posted January 14, 2009 Pretty wild design I admire the engineering.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now