Jump to content

Recommended Posts

Posted

I have a set on my bike. They were on it when I bought it. Look nice and don't get too hot in the sun, but I always wear gloves. They're not as comfortable as foam grips, but no real discomfort after several hours in the saddle. Hope this helps some.

Posted
  tiny84 said:
Ok finnaly found a bit of chrome for my bike anyone use these grips on a first gen? any feedback on them i'm thinking about bidding on em.

 

http://cgi.ebay.com/ebaymotors/Yamaha-Venture-XVZ-Buffalo-Grips-7-8-new_

W0QQitemZ320134448283QQihZ011QQcategoryZ35580QQrdZ1QQcmdZViewItem

 

I have a set, if not those, then very similar. The ones that I have the rubber ridges protrude slightly above the metal. If that is how these are, then, I would say they are the best grips I've ever purchased for any bike. If the rubber does not protrude, then I wouldn't own them. The raised rubber ridges make it very easy and comfortable to use the throttle. If the rubber is not raised, however, it would take a lot stronger grip to keep the throttle from slipping and then you can look for cramps in the forearm.

 

Although foam grips are very comfortable, I have found that they deteriorate pretty quickly. Might just be me getting some kind of solvent or gas on them but over the years I've had to replace the foam ones every year or two.

 

Dick

Posted
  rhncue said:
I have a set, if not those, then very similar. The ones that I have the rubber ridges protrude slightly above the metal. If that is how these are, then, I would say they are the best grips I've ever purchased for any bike. If the rubber does not protrude, then I wouldn't own them. The raised rubber ridges make it very easy and comfortable to use the throttle. If the rubber is not raised, however, it would take a lot stronger grip to keep the throttle from slipping and then you can look for cramps in the forearm.

 

Although foam grips are very comfortable, I have found that they deteriorate pretty quickly. Might just be me getting some kind of solvent or gas on them but over the years I've had to replace the foam ones every year or two.

 

Dick

 

I took a closer look at those and went and looked at mine and they are different. On those the rubber and metal are the same height. I wouldn't want them.

 

Dick

Posted
  bongobobny said:
I have looked at those, but never bought. Before you bid, go to www.jcwhitney.com and look at what they offer for handlebar grips. There is a pair that looks a lot like those only cheaper...

 

These http://www.jcwhitney.com/autoparts/Product/tf-Browse/s-10101/Pr-p_Product.CATENTRY_ID:2002125/p-2002125/N-111+10211+600014737/c-10111

 

Ditto on what Bob said,I have the ones from JC Whitney on mine,I like them just fine and they are cheaper than ebay.

Arthur

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...