Don...thanks for posting the RSV assembly manual...

[SilvrT]

From it I got answers to two questions, one of which seemed to be befuddling others.

 

The location/position of the Cylinder Head Cover Plate (that was in the way of accessing the seat nut) ... According to this manual, it appears to be on the right rear cylinder and the lip is facing upwards at the rear, thus getting in the way of accessing the seat nut.

 

The PO gave me this little bag with a very small allen wrench and screw...he said he had no idea what it was for. This manual explained that.

 

Both above answers are on page 8 of the manual.

 

EDIT... here I go, getting my left and right mixed up .... I meant to say LEFT above...am I right?

Edited November 24, 2008 by SilvrT

[Ponch]

I was able to access the manual. I use Adobe 7.0 Standard. From some reason I was unable to post a reply on the other thread, but all is well on this thread.

 

Ponch

[SilvrT]

Interesting... on page 20 & 21 it says when adjusting the air pressure in the shocks, there should be no weight on the wheels ... yet in the owners manual, it doesn't suggest that at all. (or am I reading this incorrectly?)

[SilvrT]

I was able to access the manual. I use Adobe 7.0 Standard. From some reason I was unable to post a reply on the other thread, but all is well on this thread.

 

Ponch

 

that's because only the moderators have posting rights to that forum.

[Ponch]

That's cool with me. Didn't know that before.

 

Thanks, Ponch

[pegscraper]

I thought that didn't sound right. I see you got your L and R straightened out. And that set screw and allen wrench are spare parts for what?

 

That must be the Canadian version of the manual. Half of it is in French. But I'd rather be looking at French than at Spanish.

[SilvrT]

I thought that didn't sound right. I see you got your L and R straightened out. And that set screw and allen wrench are spare parts for what?

 

That must be the Canadian version of the manual. Half of it is in French. But I'd rather be looking at French than at Spanish.

it's a spare set screw for the CB antenna

 

yeah... and because of that, I was only able to read half....I wonder what the other half is all about??????

[CMIKE]

How about a link to the assembly manual. Sounds like a great document to have.

Again...this forum has increased our knowledge about the great RSV.

Thanks in advance.

[SilvrT]

How about a link to the assembly manual. Sounds like a great document to have.

Again...this forum has increased our knowledge about the great RSV.

Thanks in advance.

 

 

http://www.venturerider.org/forum/showthread.php?t=29772

 

-OR-

 

RSV Assembly Manual

 

It should have been listed ...???