slick97spirit Posted November 14, 2008 #1 Posted November 14, 2008 I know there are lots of threads about headsets already here, but I didn't feel they applied. I've just purchased a 00 Millenium RSV. I pick it up at Thanksgiving. I would like to get a headset ordered that works with the factory plug. I've been checking the WWW and the options are way too many to know what to do Can you guys recommend the best one for this bike. I have open faced Fulmer helmets with a face shield. Thanks and love the sight.
sarges46 Posted November 14, 2008 #2 Posted November 14, 2008 Two choices 1/ Edsets.com (very nice) and great folks to deal with. www.edsets.com 2/ J+M at sierra electronics....you dont need the real expensive ones either. They have many differant hook up choices for the cords. wingthings also sell headsets for about 60 bucks with the cord...they are the j+m lower priced and work just fine. You need the 5 pin.
Gary N. Posted November 14, 2008 #3 Posted November 14, 2008 I use the J&M headset. I bought it at Sierra Electronics and is the same one that Yamaha sells but a lot less $$$ at Sierra. I think I paid $60 and they installed it while I waited. http://www.sierra-mc.com/default.asp
uechi kid Posted December 8, 2008 #4 Posted December 8, 2008 I use the J&M headset. I bought it at Sierra Electronics and is the same one that Yamaha sells but a lot less $$$ at Sierra. I think I paid $60 and they installed it while I waited. http://www.sierra-mc.com/default.asp How much have you used the $60 head sets? How are they, really for all around use?
johnny-canuck Posted December 8, 2008 #5 Posted December 8, 2008 I have the J&M set. Got them from Yamaha. I had a problem with the cable on mine. Yamaha refused to help or even give me options other than buy another new one as it was a year old. I contacted J&M and John himself helped me out. Long story short, J&M replaced the problem cable free of charge. With that kind of service, I'd get J&M again, BUT not from Yamaha. I guess biking season is over for another year. We got 8 or so inches of the white stuff today John
catang5oh Posted December 19, 2008 #6 Posted December 19, 2008 I bought a set of Chatterbox Noise Reducing form Chapparal Racing in Cali, about $80 for each one , plugs into Factory plug on my 99, me and wife love them so far. These come with all cords, ready to Plug and Play, some of the other ones i have seen you have to buy lower cords, upper cords etc.
1sttenor Posted December 19, 2008 #7 Posted December 19, 2008 I've got the Sierra sets. Have been using them for 2 years, so far so good.
slick97spirit Posted December 19, 2008 Author #8 Posted December 19, 2008 I bought a set of Chatterbox Noise Reducing form Chapparal Racing in Cali, about $80 for each one , plugs into Factory plug on my 99, me and wife love them so far. These come with all cords, ready to Plug and Play, some of the other ones i have seen you have to buy lower cords, upper cords etc. Well, I've gone and ordered the Chatterbox mainly because of the noise reduction. The selection has been really tough because of all the choices. Seems like most everyone is using the J&M's, but I felt a little better about the Chatterbox after reading about them. I'll let you know how they do "if I ever get to ride the darn thing." The weather around here has really sucked lately.
uechi kid Posted December 19, 2008 #9 Posted December 19, 2008 I have heard on another forum that the Edsets are about the best but I don't really want to spend $180 per set. I will if that's what I have to but.... Can you please tell me what model number chatterbox and J&M sets you guys bought. Thanks.
whozleft Posted December 19, 2008 #10 Posted December 19, 2008 I just wanted to say that I have delt with Sierra for many years. More so when I had Goldwings. Any time I had an issue with headsets or the like they have always been great to deal with and have taken care of the problem. Once at a Goldwing rally they even replaced a cord for me on the spot even after I told them I had bought it from another vendor a year before. I also have visited their store here in Ohio and got excellent service. So this is my vendor endorsement. I ahve also heard that the Edset people are good to deal with. We are forunate to have many vendors that still know the value of customer service. Have a very Merry Christmas!
RedRider Posted December 19, 2008 #11 Posted December 19, 2008 J&M have been good to work with. They are reliable products (I have 3) and the folks there will answer any questions you have. Had difficulties with the Chatterbox headset a few years ago. Went thru connection cables like beer thru a coed. My dealer (where I purchased it) replaced the first unit under warranty. I thru the second unit away and purchased the J&M. RR
catang5oh Posted December 20, 2008 #12 Posted December 20, 2008 Well, I've gone and ordered the Chatterbox mainly because of the noise reduction. The selection has been really tough because of all the choices. Seems like most everyone is using the J&M's, but I felt a little better about the Chatterbox after reading about them. I'll let you know how they do "if I ever get to ride the darn thing." The weather around here has really sucked lately. http://www.chaparral-racing.com/Chaparral/product_family.asp?family%5Fid=11864&gift=False&mscssid=0CF81F4066474CADA5B99A7F5AC9A59B 011-1408 is the number on invoice, which was for open face.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now