Light bar

[Seaking]

I don't think they make the Ring of Fire for the RSV

 

If they do, please let me know, as I loved having that on the bike

 

My RSV is Blue/Black, so I'll be doing the exact same thing as the wing to the RSV

 

Sorry, didn't mean to highjack the thread with LED's

 

Start a new thread quick! I'll be there =)

[djh3]

Well I know this is kind of old thread but a good one none the less. I appreciate the info on the differnt lights avaiable. I just picked this on eoff e-bay. Looks just like one I saw pictured in on e of the post about this mod somehwere.

http://d3d71ba2asa5oz.cloudfront.net/13000126/images/dscf1286.jpg

[M61A1MECH]

Private message sent with install instructions also attached in PDF format.

I think the install instructions are also available over on the Venturers website.

[djh3]

Thanks for the info. My list of things to get done is growing. Lucky for me its in the 80"s. Ah aint life grand.

[djh3]

HMMM so if one is good, would 2 be better? Mount it in an over under configuaration?? Maybe make the lower one all brake ?? Would be easy to make a bracket to hang it from the first.

 

 

Well got ready to wire and mount the light today. I was using a battery charger on 2am to run the different circuits to figure out wiring. I appeard to have a problem. Only the middle and outboard lights would work. So I go in the house and get on my e-bay account and check the listing. DOUGH you dummy I should have read it a little closer. It is only a 3 led light. Looks just like the ones in other posts but it aint. Well h&ll its here so I'm gonna mount it. Actually I mounted 2 of them. I put the other right under it. Not to bad looking I think. Instead of the plastic spacers I used some 3/8" alum tubing I had. I cut it to length, mounted a screw up thru it and put it in a drill and threw some metal polish on a rag and turned the drill on. Made nice shiny pieces. The hanger brackets I fab'd out of 3/4" alum angle I had around. Trimmed it up and polished it to, not with the drill though.

Edited February 1, 2012 by djh3