Jump to content

Recommended Posts

Posted

I think its the same as the RSTD - there are two buttons on the "dash" for switching between Odometer/Trips/Clock etc. Press both buttons at the same time until the hour starts to flash - push the left button to set the hour, push the right button to move the flash over to the minutes, push the left button to set the minutes, push the right button one last time - and bingo - the clock is set.

Guest tx2sturgis
Posted

And push and HOLD the select button to bring up the time display.

 

You're welcome!

 

;)

Posted

Once again you guys are the best. I'm falling deeper in love with this bike every day. I just installed the fork balance kit today. Pretty easy. The hardest part was running the hose. I kept reading (not here) about how top heavy this bike was and how hard it was to handle at slow speeds and in parking lots. I don't get it. Once I got used to the different foot position compared to the 1st Gen it's been easy. The low speed handling is actually better than the 1st Gen. I would agree that this may be a little too much bike for a beginner but I just don't see all the fuss. For a heavy, this bike is very well mannered.

Guest tx2sturgis
Posted
  flb_78 said:
Wow, after 15 months of owning my Venture, I never knew I had a clock. It was only 8 minutes off as well!!

 

Hey dude...so...

 

...can I have that $60 Formotion Clock you have mounted on the bars? You wont be needing it now!!

 

:duck:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...